Menu Close

Federal Small Pistol Match Primers

$157.90

Category:

Federal Small Pistol Match Primers

contact us for more information here

Same primers used in Gold Medal cartridges. Manufactured to exacting tolerances. Uses Federal’s exclusive basic lead styphnate priming mix for optimum primer ignition. 

Rimfire cartridges use a thin brass case with a hollow bulge, or rim, around the back end. This rim is filled during manufacture with an impact-sensitive primer. In the wet state, the primer is stable; a pellet of wet primer is placed in the shell and simply spun out to the full extremes of the rim. (For more on the exact process and one set of chemical compounds that have been used successfully, see U.S. Patent 1,880,235, a 1932 Remington Arms patent by James E. Burns.) In the dry state, the primer within the rim becomes impact-sensitive. When the rim is then crushed by the hammer or firing pin, the primer detonates and ignites the powder charge. Rimfire cartridges are single-use and normally cannot be reloaded. Also, since the rim must be thin enough to be easily crushed, the peak pressure possible in the case is limited by the strength of this thin rim. Rimfire cartridges originally were available in calibers up to 1″ (100 caliber), however, all but the small

Reviews

There are no reviews yet.

Be the first to review “Federal Small Pistol Match Primers”

Your email address will not be published.